How Managers Can Remove Graphite From Commercial Carpet
Don’t delay, waiting may cause a graphite spill to become a permanent stain. Blot liquids with a dry, white absorbent cloth or white paper towels. Gently scrape up semi-solids with a rounded spoon. Break up solids and vacuum.
Pretest any spot removal cleaner (for color transfer to the cloth or damage to the carpet) in an out of the way area
Detergent Solution – Mix one fourth (1/4) teaspoon of a clear liquid dishwashing detergent per one (1) cup of lukewarm water. NEVER USE A STRONGER CONCENTRATION! Thorough rinsing is necessary to remove detergent residues that may cause rapid soiling. It may be necessary to rinse with warm water several times to completely remove residues.
Apply a small amount of the spot cleaner to a white cloth, and work in gently – do not rub working from the edges of the graphite spill to the center to prevent spreading. Allow to remain on the spill a few minutes. Be patient. Blot.
Warm Water – Lukewarm tap water should be used in most cases to rinse the cleaning solutions from the fiber. Failure to completely rinse the solutions from the fiber may cause accelerated soiling.
When the spill is completely removed, rinse the area with warm water; blot with a dry cloth until all moisture is removed.
Never use a laundry detergent of any type, because laundry detergents may contain optical brighteners that dye the carpet. Do not select an automatic dishwashing detergent because many contain bleaching agents that destroy carpet fibers.
Many retail spot removal detergents leave residues in the carpet that may attract soil. Thoroughly rinse the area several times with lukewarm tap water. A mist type sprayer is recommended to prevent over wetting. Blot with paper towels and pat dry after each rinse. Several rinses are often necessary to thoroughly remove residues. Never use any of the cleaning solutions in concentrations stronger than those recommended.
Method Clean Solutions
315 Babcock st
Buffalo, NY 14210